You are currently browsing the tag archive for the ‘internal clock battery’ tag.

Finally, a new post.

How many of you still have the Canon EOS 50D and still love to shoot with it? This is the very last model in the xxD line without video and still made out of a metal frame but a camera this old will start to show its quirky nature. First it was the shutter button assembly failure. Brought it to canon and it was replaced within a day.

MacDy_50Dicb-8

My old reliable.

Now, when 2 fresh batteries (BP-511A) are loaded into the battery grip they would not last a day. The top LCD would start doing the blinking low battery dance. Or in some instance a recharged BP-511A are loaded and the camera does not turn on. Sound familiar?
Do not panic. There is probably nothing wrong with the BP-511As. Nor the 50D itself. But the internal clock battery has dried up and needs replacing. The CR-2016 can be purchased in most stores that supply wrist watch batteries.

MacDy_50Dicb-7

The original CR-2012 from the Canon EOS 50D

First, make sure the 50D is turned off. If a battery grip is attached, take out the BP-511As and detach the grip. Look into the 50D battery compartment and there is a little tiny plastic plate with a CR-2016 engraved on it.

MacDy_50Dicb-3

The internal clock battery slot.

Make sure the brand spanking new CR-2016 is right where you need it. Once this is removed date and clock will revert to 0. Don’t worry continuous file numbering will not reset.
Then, by pressing on the grooves with a finger slowly slide out the battery panel. The little plastic battery tray should slide out with just a little bit of friction since the slot has not been moved for years. Then remove the dead CR-2016 and put in the fresh one. + goes on the side facing the BP-511A chamber. Battery brand will not be crucial to breathing new life into the camera. Just make sure the CR-2016 are new stock.

MacDy_50Dicb-4

Put a finger on the grooves and slide out the battery holder.

MacDy_50Dicb-5

Once the old is replaced with the new CR-2016 slide the battery back into the slot and push it down gently into the slot.

Then slide the little tray all the way back inside the slot. Insert the BP-511A into the battery compartment and, close and lock the compartment door. Turn on the camera and the adjust date and time screen will magically appear. Set to the appropriate time zone and the old EOS 50D will have another few years to go.

That is it. Simple, easy and without problems.

MacDy_50Dicb-2

The 50D is now ready to go back into action.

MacDy_50Dicb-1

On a side note, found Energizers near me and it only cost PHP50 (about US$1.00) for a pair.

Enter your email address for a subscription to my blog and receive notifications of new posts by email.

Join 16 other followers

WELCOME

Welcome & enjoy your stay

Welcome to my blog.

Here is an easy access to my Portfolio site.

Portfolio

Contact

macdy88@gmail.com
+63 917 888 8069
+63 922 868 8069

© Mac Dy and MacPhotographyDy, 2009-2013. Unauthorized use and/or duplication of this material without express and written permission from this blog’s author and/or owner is strictly prohibited.
Featured Posts From the Past:

Total Lunar Eclipse: June 16, 2011

Total Lunar Eclipse: June 16, 2011

Click to view largo

20th Century Lens & 21st Century DSLR Invades Chinatown

20th Century Lens & 21st Century DSLR Invades Chinatown

Kenko PRO1 Digital S Circular PL Filter

Kenko PRO1 Digital S Circular PL Filter

A Maze of People, Buildings and Public Transportation

A Maze of People, Buildings and Public Transportation

EOS 60D WHERE DOES IT STAND?

EOS 60D WHERE DOES IT STAND?

EOS 50D SHUTTER BUTTON FAILURE

EOS 50D SHUTTER BUTTON FAILURE

Shutter switch assembly: top and bottom view

JOURNEY TO MT. PINATUBO CRATER LAKE

Mac_3482x Mt Pinatubo Crater Lake

Categories

December 2017
M T W T F S S
« Jul    
 123
45678910
11121314151617
18192021222324
25262728293031

Monthly Archives

flickr ’06-’09

m dee- on & off.... Get yours at bighugelabs.com